 |
|
|
Torch Down
6200 – Torch (Black)
6210 – Torch (White)
6220 – Torch (Weathered Wood)
6230 – Torch (Cedar)
6240 – Torch (Green)
6250 – Torch (Hickory)
6260 – Torch Base (Smooth)
6270 – Torch Base (Torch)
6280 – Torch (Slate)
6290 – Torch Cap (Smooth)
|
|
Description
Torch Down is an
APP modified bitumen sheet. It incorporates the features of a
tough, non-woven, polyester mat that is saturated and coated
with a blend of APP (Atactic Polypropylene) polymer and high
quality asphalt. Torch Down has a construction that
provides an extremely durable sheet with excellent weathering
properties. The premium APP asphalt blend is formulated to
provide excellent physical properties for ease of installation
and long-term roof performance. The polyester mat provides good
tensile strength, toughness and puncture resistance and can
accommodate stresses created by typical rooftop expansion and
contraction forces. The covering layer of ceramic-coated roofing
granules provides durability along with superior resistance to
damage from weather and foot traffic. The white granular surface
also provides heat reflectance. The back of the sheet has a
printed polyolefin burn-off film adhered to a diamond-embossed,
textured surface for ease of heat welding.
Use
Torch Down is
designed for use as a premium modified bitumen cap sheet.
Because of its excellent weatherability, durability and handling
characteristics, Torch Down may be used not only as a modified
bitumen cap sheet but also as a flashing material. This product
may only be installed using heat-welding application techniques.
Advantages
• The
polyester mat provides excellent puncture and tear resistance
• The premium quality APP blend allows for excellent weathering
characteristics
• The premium thickness sheet combined with the premium quality
APP blend allows for the maximum overall sheet performance |
|
|
 |
| |
Typical Physical
Properties*
Thickness................................................................165
mils (4.2 mm)
Tensile Strength @ 0°F (-18 °C)
Machine Direction.......................... 90 lbs. force/in.
width (40.8 kN/m)
Cross Machine Direction.................55 lbs. force/in.
width (24.9 kN/m)
Elongation @ 0°F (-18 °C)
Machine
Direction.....................................................................38%
Cross Machine
Direction...........................................................42%
Tensile-Tear
Machine Direction.........................................101
lbs./in. (45.8 kN/m)
Cross Machine Direction..................................62
lbs./in. (28.1 kN/m)
Low Temperature
Flexibility................................................14°F
(-10°C)
Dimensional Stability
Machine
Direction.......................................................0.90%
change
Cross Machine
Direction.............................................0.60%
change
* Material
tested in accordance with ASTM D 5147 Standard
Test Method for Sampling and Testing Modified Bituminous
Sheet Materials. |
|
Sizes
Roll
size........................................Approximately 1.0
square (10 m2)
Roll
weight.................................................................106
lbs. (48 kgs.)
Roll
length....................................................................32’
10” (10.0 m)
Roll
width........................................................................393⁄8”
(1.0 m )
 |
|
|
